Motore di ricerca datesheet componenti elettronici
  Italian  ▼
ALLDATASHEETIT.COM

X  

2--1490413--1 Scheda tecnica(PDF) 4 Page - TE Connectivity Ltd

Il numero della parte 2--1490413--1
Spiegazioni elettronici  Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
Download  5 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Produttore elettronici  TEC [TE Connectivity Ltd]
Homepage  http://www.te.com/usa-en/home.html
Logo TEC - TE Connectivity Ltd

2--1490413--1 Scheda tecnica(HTML) 4 Page - TE Connectivity Ltd

  2--1490413--1 Datasheet HTML 1Page - TE Connectivity Ltd 2--1490413--1 Datasheet HTML 2Page - TE Connectivity Ltd 2--1490413--1 Datasheet HTML 3Page - TE Connectivity Ltd 2--1490413--1 Datasheet HTML 4Page - TE Connectivity Ltd 2--1490413--1 Datasheet HTML 5Page - TE Connectivity Ltd  
Zoom Inzoom in Zoom Outzoom out
 4 / 5 page
background image
408- 10110
Rev D
4
of 5
Crimp is centered on wire barrel. Crimp may be off
center but not off end of wire barrel.
Wire size being used matches the wire range or size
stamped on terminal or splice and dies.
Wire insulation does not enter wire barrel.
End of wire is visible through sight hole of terminal or
splice.
Crimp is off end of wire barrel.
End of wire is not visible through sight hole of terminal
or splice. Wire was not inserted far enough.
Excessive “flash” on terminal or splice. This indicates
damaged dies or wrong wire size, splice, or tooling com-
bination was used.
Nicked or missing strands.
ACCEPT
REJECT
Terminal
Splice
1
2
3
4
1
4
2
3
2
4
3
1
1
4
6
2
3
4
1
5
2
1
2
3
4
Wire size being used does not match the wire range
or size stamped on terminal or splice and dies.
Wire insulation enters wire barrel. Check that the
strip length is correct.
Figure 5
5
5
3
2. Check all surfaces for wear. Inspect the crimp
area for flattened, chipped, cracked, worn, or
broken areas. If damage is evident, the die must
be replaced. Refer to Figure 6.
Figure 6
Pitted
Flattened
Broken
Chipped
B. Gaging the Crimping Chamber
This inspection requires the use of a plug gage
conforming to the dimensions in Figure 7. Refer to
Figure 7, and gage the crimping chamber as follows:
1. Mate the dies until it is evident that they have
bottomed. Hold the dies in this position.
2. Align the GO element with the wire barrel
crimping chamber. Push the element straight into
the the crimping chamber without using force. The
GO element must pass completely through the
crimping chamber.
3. Align the NO--GO element and try to insert it
straight into the same crimping chamber. The
NO--GO element may start entry but must not pass
completely through.


Codice articolo simile - 2--1490413--1

Produttore elettroniciIl numero della parteScheda tecnicaSpiegazioni elettronici
logo
TE Connectivity Ltd
2--21000--0 TEC-2--21000--0 Datasheet
115Kb / 4P
   Base Assembly Universal
2--21000--3 TEC-2--21000--3 Datasheet
210Kb / 7P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
2--21000--3 TEC-2--21000--3 Datasheet
115Kb / 4P
   Base Assembly Universal
logo
Tyco Electronics
2--21000--5 MACOM-2--21000--5 Datasheet
108Kb / 4P
   0.8mm CHAMP* Crimper Assemblies
2--21000--6 MACOM-2--21000--6 Datasheet
108Kb / 4P
   0.8mm CHAMP* Crimper Assemblies
More results

Descrizione simile - 2--1490413--1

Produttore elettroniciIl numero della parteScheda tecnicaSpiegazioni elettronici
logo
Tyco Electronics
408-10324 MACOM-408-10324 Datasheet
239Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
408-9935 MACOM-408-9935 Datasheet
247Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
logo
TE Connectivity Ltd
408-9359 TEC-408-9359 Datasheet
210Kb / 7P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
logo
Tyco Electronics
408-9039 MACOM-408-9039 Datasheet
103Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
411-3236 MACOM-411-3236 Datasheet
216Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
logo
TE Connectivity Ltd
408-6561 TEC-408-6561 Datasheet
110Kb / 4P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
408-1216 TEC-408-1216 Datasheet
91Kb / 2P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
logo
Tyco Electronics
408-8377 MACOM-408-8377 Datasheet
249Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
408-8607 MACOM-408-8607 Datasheet
247Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
408-9240 MACOM-408-9240 Datasheet
85Kb / 3P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
More results


Html Pages

1 2 3 4 5


Scheda tecnica Scarica

Go To PDF Page


Link URL




Privacy Policy
ALLDATASHEETIT.COM
Lei ha avuto il aiuto da alldatasheet?  [ DONATE ] 

Di alldatasheet   |   Richest di pubblicita   |   contatti   |   Privacy Policy   |   scambio Link   |   Ricerca produttore
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com