Motore di ricerca datesheet componenti elettronici
  Italian  ▼
ALLDATASHEETIT.COM

X  

2--22285--6 Scheda tecnica(PDF) 5 Page - TE Connectivity Ltd

Il numero della parte 2--22285--6
Spiegazioni elettronici  Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
Download  7 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Produttore elettronici  TEC [TE Connectivity Ltd]
Homepage  http://www.te.com/usa-en/home.html
Logo TEC - TE Connectivity Ltd

2--22285--6 Scheda tecnica(HTML) 5 Page - TE Connectivity Ltd

  2--22285--6 Datasheet HTML 1Page - TE Connectivity Ltd 2--22285--6 Datasheet HTML 2Page - TE Connectivity Ltd 2--22285--6 Datasheet HTML 3Page - TE Connectivity Ltd 2--22285--6 Datasheet HTML 4Page - TE Connectivity Ltd 2--22285--6 Datasheet HTML 5Page - TE Connectivity Ltd 2--22285--6 Datasheet HTML 6Page - TE Connectivity Ltd 2--22285--6 Datasheet HTML 7Page - TE Connectivity Ltd  
Zoom Inzoom in Zoom Outzoom out
 5 / 7 page
background image
408- 9359
5
of 7
Rev C
Figure 6
Locking
Lance
Window
Preload Window
Locking Lance Seated
Against Housing Window
Carrier Strip
90
WARNING:
Use care, carrier strip may have sharp edges.
11. Inspect each termination according to the
procedures given in Section 5, TERMINATION.
12. If all terminations are acceptable, grasp each
wire and gently push forward to insert the contacts
completely into the housing assembly. Refer to
Figure 6. Pull back lightly on the wire to ensure that
the locking lance is engaged.
5. INSPECTION
Figure 7 illustrates properly and improperly terminated
contacts. Each view gives a brief description of the
termination.
Inspect each termination as follows:
1. Make sure that the wire is located in the contact
slot as shown in Figure 7.
2. Make sure that the wire extends beyond the
front contact slot (minimum dimension is given in
Figure 7).
3. Make sure that the contact wire channel is not
deformed. If damage is apparent, replace the
contact(s) per Instruction Sheet 408--6919,
packaged with the connector.
4. Make sure the insulation barrel is closed to
secure the insulation of the wire, and that the
preload forward stop is formed over to allow
contact insertion.
The insulation barrel does not have to be
wrapped tightly around the insulation. The
purpose of the insulation barrel is to prevent the
wire from being lifted from the wire channel.
6. TOOL CERTIFICATION
The procedures that follow have been established to
ensure the quality and reliability of the terminating
tools. A brief check should be made daily, and a more
detailed inspection should be scheduled by your
Quality Control Group.
6.1. User Maintenance
Each user should be made aware of, and responsible
for the following:
1. Remove dust, moisture, and other contaminants
using a clean brush or a soft, lint--free cloth. Do not
use objects that could damage the tool.
2. Make sure all components are in place and are
properly secured. If not, return the tool to your
supervisor.
3. Squeeze and release the trigger or cam handle
to be sure the mechanism inside the body moves
freely and does not bind.
6.2. Quality Control Maintenance
Regular inspections should be performed by your
Quality Control personnel, and a record of quality
control inspections should remain with the personnel
responsible for the tool. We recommend one
inspection a month; however, operator training and
skill, amount of use, ambient working conditions, and
your company’s standards are all factors to consider
when establishing inspection frequency.
These inspections should be performed in the
following sequence:
1. Remove any accumulated film with a suitable
cleaning agent that will not affect paint or
polycarbonate plastic.
2. Make sure all components are in place and are
tightly secured.
3. Make a few test terminations and inspect the
termination as instructed in Section 5,
INSPECTION.
NOTE


Codice articolo simile - 2--22285--6

Produttore elettroniciIl numero della parteScheda tecnicaSpiegazioni elettronici
logo
TE Connectivity Ltd
2--21000--0 TEC-2--21000--0 Datasheet
115Kb / 4P
   Base Assembly Universal
2--21000--3 TEC-2--21000--3 Datasheet
115Kb / 4P
   Base Assembly Universal
logo
Tyco Electronics
2--21000--5 MACOM-2--21000--5 Datasheet
108Kb / 4P
   0.8mm CHAMP* Crimper Assemblies
2--21000--6 MACOM-2--21000--6 Datasheet
108Kb / 4P
   0.8mm CHAMP* Crimper Assemblies
2--21000--7 MACOM-2--21000--7 Datasheet
108Kb / 4P
   0.8mm CHAMP* Crimper Assemblies
More results

Descrizione simile - 2--22285--6

Produttore elettroniciIl numero della parteScheda tecnicaSpiegazioni elettronici
logo
Tyco Electronics
408-10324 MACOM-408-10324 Datasheet
239Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
408-9935 MACOM-408-9935 Datasheet
247Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
408-9039 MACOM-408-9039 Datasheet
103Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
411-3236 MACOM-411-3236 Datasheet
216Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
logo
TE Connectivity Ltd
408-6561 TEC-408-6561 Datasheet
110Kb / 4P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
408-1216 TEC-408-1216 Datasheet
91Kb / 2P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
408-10110 TEC-408-10110 Datasheet
191Kb / 5P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
logo
Tyco Electronics
408-8377 MACOM-408-8377 Datasheet
249Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
408-8607 MACOM-408-8607 Datasheet
247Kb / 6P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
408-9240 MACOM-408-9240 Datasheet
85Kb / 3P
   Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
More results


Html Pages

1 2 3 4 5 6 7


Scheda tecnica Scarica

Go To PDF Page


Link URL




Privacy Policy
ALLDATASHEETIT.COM
Lei ha avuto il aiuto da alldatasheet?  [ DONATE ] 

Di alldatasheet   |   Richest di pubblicita   |   contatti   |   Privacy Policy   |   scambio Link   |   Ricerca produttore
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com