Motore di ricerca datesheet componenti elettronici |
|
TLP718 Scheda tecnica(PDF) 1 Page - Toshiba Semiconductor |
|
TLP718 Scheda tecnica(HTML) 1 Page - Toshiba Semiconductor |
1 / 9 page TLP718 2015-10-13 1 TOSHIBA PHOTOCOUPLER GaA ℓAs IRED & PHOTO-IC TLP718 Isolated Bus Drivers High Speed Line Receivers Microprocessor System Interfaces The Toshiba TLP718 consists of a GaA ℓAs light-emitting diode and an integrated high-gain, high-speed photodetector. This unit is a 6-pin SDIP. The TLP718 is 50% smaller than the 8-PIN DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring safety standard certification. The detector has a totem pole output stage to provide both source and sink driving. The detector IC has an internal shield that provides a guaranteed common-mode transient immunity of 10 kV/ μs. The TLP718 is inverter logic type. For buffer logic type, the TLP715 is in line- up. Inverter logic type (totem pole output) Guaranteed performance over temperature : −40 to 100°C Power supply voltage : 4.5 to 20 V Input current: IFHL = 3 mA (max) Switching time ( tpHL / tpLH) : 250 ns (max) Common-mode transient immunity : ±10 kV/ μs (min) Isolation voltage : 5000 Vrms (min) UL recognized UL1577, File No.E67349 c-UL recognized CSA Component Acceptance Service No. 5A, File No.E67349 Option (D4) VDE approved : DIN EN60747-5-5 Note : When a EN60747-5-5 approved type is needed, Please designate “Option(D4)” Construction Mechanical Rating 7.62 mm pitch standard type 10.16 mm pitch TLPXXXF type Creepage Distance Clearance Insulation Thickness 7.0 mm (min) 7.0 mm (min) 0.4 mm (min) 8.0 mm (min) 8.0 mm (min) 0.4 mm (min) Truth Table Input LED Tr1 Tr2 Output H ON OFF ON L L OFF ON OFF H Unit: mm Weight: 0.26 g (typ.) 4.58±0.25 9.7±0.3 0.4±0.1 1.27±0.2 1.25±0.25 7.62±0.25 1 2 3 6 5 4 11-5J1 TOSHIBA 11-5J1 VCC GND SHIELD 1 3 4 5 6 2 1: ANODE 2: N.C. 3: CATHODE 4: GND 5: VO (Output) 6: VCC Pin Configuration (Top View) Note: 0.1 μF bypass capacitor must be connected between pins 6 and 4. Schematic VCC VO GND ICC IO 6 5 4 SHIELD 3- 1+ IF VF Tr1 Tr2 Start of commercial production 2008/12 (Note) |
Codice articolo simile - TLP718_15 |
|
Descrizione simile - TLP718_15 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |