BATTERY

Full load runtime (minutes)

7 min. (1600w)

Half load runtime (minutes)

19 min. (800w)

DC system voltage (VDC)

48

Battery recharge rate (included

batteries)

Less than 4 hours from 10% to 90%

Replacement battery cartridge

(internal UPS battery replacement)

RBC54

Battery Access

Battery access door

Battery replacement description

Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Voltage regulation description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 79V to 147V

Overvoltage correction

Input voltages between 128 and 147 are reduced by 12%

Undervoltage correction

Input voltages between 95 and 104 are boosted by 12%

Severe undervoltage correction

Input voltages between 79 and 94 are boosted by 24%

LEDS ALARMS & SWITCHES

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Alarms

Audible alarm indicates power-failure, overload and low-battery conditions

Alarm cancel operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate

low-battery status

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation

SURGE / NOISE SUPPRESSION

UPS AC suppression joule rating

480

UPS AC suppression response time

Instantaneous

EMI / RFI AC noise suppression

Yes

PHYSICAL

Installation form factors supported

with included accessories

Tower

Primary form factor

Tower

UPS / Power Module dimensions in

primary form factor (height x width x

depth / inches)

14.2 x 9.2 x 12

UPS / Power Module dimensions in

primary form factor (height x width x

depth / cm)

36.2 x 23.5 x 30.5

3 / 5