Motore di ricerca datesheet componenti elettronici |
|
ADC08500 Scheda tecnica(PDF) 1 Page - Texas Instruments |
|
|
ADC08500 Scheda tecnica(HTML) 1 Page - Texas Instruments |
1 / 46 page ADC08500 www.ti.com SNAS373E – MAY 2007 – REVISED APRIL 2013 ADC08500 High Performance, Low Power 8-Bit, 500 MSPS A/D Converter Check for Samples: ADC08500 1 FEATURES DESCRIPTION The ADC08500 is a low power, high performance 2 • Internal Sample-and-Hold CMOS analog-to-digital converter that digitizes • Single +1.9V ±0.1V Operation signals to 8 bits resolution at sampling rates up to • Choice of SDR or DDR Output Clocking 500 MSPS. Consuming a typical 0.8 Watts at 500 MSPS from a single 1.9 Volt supply, this device is • Multiple ADC Synchronization Capability ensured to have no missing codes over the full • Ensured No Missing Codes operating temperature range. The unique folding and • Serial Interface for Extended Control interpolating architecture, the fully differential comparator design, the innovative design of the • Fine Adjustment of Input Full-Scale Range and internal sample-and-hold amplifier and the self- Offset calibration scheme enable a very flat response of all • Duty Cycle Corrected Sample Clock dynamic parameters beyond Nyquist, producing a high 7.5 ENOB with a 250 MHz input signal and a APPLICATIONS 500 MHz sample rate while providing a 10-18 B.E.R. Output formatting is offset binary and the LVDS • Direct RF Down Conversion digital outputs are compatible with IEEE 1596.3-1996, • Digital Oscilloscopes with the exception of an adjustable common mode • Satellite Set-top Boxes voltage between 0.8V and 1.2V. • Communications Systems The converter has a 1:2 demultiplexer that feeds two • Test Instrumentation LVDS buses and reduces the output data rate on each bus to half the sampling rate. KEY SPECIFICATIONS The converter typically consumes less than 3.5 mW • Resolution 8 Bits in the Power Down Mode and is available in a 128- lead, thermally enhanced exposed pad HLQFP and • Max Conversion Rate 500 MSPS (min) operates over the Industrial (-40°C ≤ TA ≤ +85°C) • Bit Error Rate 10-18 (typ) temperature range. • ENOB @ 250 MHz Input 7.5 Bits (typ) • DNL ±0.15 LSB (typ) • Power Consumption – Operating 0.8 W (typ) – Power Down Mode 3.5 mW (typ) 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2 All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Copyright © 2007–2013, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. |
Codice articolo simile - ADC08500 |
|
Descrizione simile - ADC08500 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |