Motore di ricerca datesheet componenti elettronici |
|
TDA3681A Scheda tecnica(PDF) 2 Page - NXP Semiconductors |
|
TDA3681A Scheda tecnica(HTML) 2 Page - NXP Semiconductors |
2 / 22 page 2003 Aug 29 2 Philips Semiconductors Product specification Multiple voltage regulator with switch and ignition buffer TDA3681A FEATURES General • Extremely low noise behaviour and good stability with very small output capacitors • Second supply pin for regulators 3 and 4 to reduce power dissipation (e.g. via a DC-to-DC converter) • Three VP-state controlled regulators (regulators 1, 3 and 4) and a power switch • Regulator 2, reset and ignition buffer operational during load dump and thermal shutdown • Combined control pin for switching regulators 1 and 3 • Separate control pins for switching regulator 4 and the power switch • Supply voltage range from −18 V to +50 V • Low quiescent current in standby mode (when regulators 1, 3 and 4 and power switch are switched off and ignition input is low) • Hold output for low VP, load dump and temperature protection • Reset (push-pull output stage) for regulator 2 and hold output (open-collector output) • Adjustable reset delay time • High supply voltage ripple rejection • Backup capacitor for regulator 2 • One independent ignition buffer (active HIGH). Protections • Reverse polarity safe (down to −18 V without high reverse current) • Able to withstand voltages up to 18 V at the outputs (supply line may be short-circuited) • ESD protection on all pins • Thermal protections • Load dump protection • Foldback current limit protection for regulators 1, 2, 3 and 4 • Delayed second current limit protection for the power switch (at short circuit) • The regulator outputs and the power switch are DC short-circuit safe to ground and supply (VP). GENERAL DESCRIPTION The TDA3681A is a multiple output voltage regulator with a power switch and an ignition buffer. It is intended for use in car radios with or without a microcontroller. The TDA3681A contains the following: • Four fixed voltage regulators with a foldback current protection (regulators 1, 2, 3 and 4). Regulator 2, which is intended to supply a microcontroller, also operates during load dump and thermal shutdown • Regulators 3 and 4 have a second supply pin that can be connected to a lower supply voltage (> 6.5 V) to reduce the power dissipation • A power switch with protection, operated by a control input • Reset and hold outputs that can be used to interface with the microcontroller; the reset signal can be used to call up the microcontroller • Both supply pins can withstand load dump pulses and negative supply voltages • Regulator 2, which is in regulation at a backup voltage above 6.5 V • A provision for the use of a reserve supply capacitor that will hold enough energy for regulator 2 (5 V continuous) to allow a microcontroller to prepare for loss of voltage • An ignition input Schmitt trigger with push-pull output stage. ORDERING INFORMATION TYPE NUMBER PACKAGE NAME DESCRIPTION VERSION TDA3681ATH HSOP20 plastic, heatsink small outline package; 20 leads; low stand-off height SOT418-3 |
Codice articolo simile - TDA3681A |
|
Descrizione simile - TDA3681A |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |