SN74HC193Q1

4BIT SYNCHRONOUS UP/DOWN COUNTER

(DUAL CLOCK WITH CLEAR)

SCLS594A − NOVEMBER 2004 − REVISED APRIL 2008

4

POST OFFICE BOX 655303

−0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±25 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

108

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions (see Note 3)

MIN

NOM

MAX

UNIT

VCC

Supply voltage

2

5

6

V

VCC = 2 V

1.5

VIH

High-level input voltage

VCC = 4.5 V

3.15

V

VIH

High-level input voltage

VCC = 6 V

4.2

V

VCC = 2 V

0.5

VIL

Low-level input voltage

VCC = 4.5 V

1.35

V

VIL

Low-level input voltage

VCC = 6 V

1.8

V

VI

Input voltage

0

VCC

V

VO

Output voltage

0

VCC

V

VCC = 2 V

1000

∆t/∆v‡

Input transition rise/fall time

VCC = 4.5 V

500

ns

∆t/∆v‡

Input transition rise/fall time

VCC = 6 V

400

ns

TA

Operating free-air temperature

Q-suffix devices

−40

125

°C

TA

Operating free-air temperature

I-suffix devices

−40

85

°C

NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

‡ If this device is used in the threshold region (from VILmax = 0.5 V to VIHmin = 1.5 V), there is a potential to go into the wrong state from induced

grounding, causing double clocking. Operating with the inputs at tt = 1000 ns and VCC = 2 V does not damage the device; however, functionally,

the CLK inputs are not ensured while in the shift, count, or toggle operating modes.