3

FN6668.7

June 4, 2010

12

SCL

Serial Clock. The SCL input is used to clock all serial data into and out of the device. The input buffer

is activated to minimize power consumption.

13

can be used as an interrupt or frequency output pin. The IRQ/FOUT mode is selected via the frequency

out control bits of the control/status register. Interrupt Mode. The pin provides an interrupt signal

output. This signal notifies a host processor that an alarm has occurred and requests action. It is an

open drain active low output. Frequency Output Mode. The pin outputs a clock signal, which is

It is an open drain output. The output is open drain and requires a pull-up resistor.

14

6, 8, 15

GND

Power Supply. Chip power supply and ground pins. The device will operate with a power supply from

PIN

NUMBER

SYMBOL

DESCRIPTION

Ordering Information

PART NUMBER

(Note 3)

PART

MARKING

(V)

TEMP RANGE

(°C)

PACKAGE

(RoHS COMPLIANT)

PKG.

DWG. #

ISL12022MIBZ (Note 2)

ISL12022MIBZ

2.7 to 5.5

-40 to +85

20 Ld SOIC

M20.3

ISL12022MIBZ-T (Notes 1, 2) ISL12022MIBZ

2.7 to 5.5

-40 to +85

20 Ld SOIC (Tape and Reel) M20.3

1. Please refer to TB347 for details on reel specifications.

2. These Intersil plastic packaged products employ special material sets, molding compounds and 100% matte tin plate plus

anneal (e3) termination finish. These products do contain Pb but they are RoHS compliant by exemption 7 (lead in high melt

temp solder for internal connections) and exemption 5 (lead in piezoelectric elements). These Intersil RoHS compliant

products are compatible with both SnPb and Pb-free soldering operations. These Intersil RoHS compliant products are MSL

classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.

3. For Moisture Sensitivity Level (MSL), please see device information page for ISL12022M. For more information on MSL please

see techbrief TB363.

ISL12022M