3

Machine oriented packaging

“Tape-on-Reel”

Reel dimensions and position of pin headers

Unit packaging “Tape-on-Reel”

Quantity of SL-SMT 3.5 on the reel

open and closed versions

Unit packaging “Tape-on-Reel”

Quantity of SL-SMT 3.5 on the reel

flanged version

The pin headers for the 90° and 180°

versions of the SL-SMT 3.5 are available

in “Tape-on-Reel” for automatic

component replacement.

The reels are anti-static, have a diameter

of 330 mm, and are designed for all

commercially available feeders.

The tapes used conform to the standard

IEC 60286-3 and are made of anti-static,

black polystyrene. The tape is covered

with a transparent plastic film.

A high temperature resistant pick-and-

place pad is located in the middle of the

pin header for automatic gripping of the

straight pin header SL-SMT 3.5/180°.

This pick-and-place pad is included in the

“Tape-on-Reel” packaging.

The angled SL-SMT 3.5/90° pin header is

positioned so that no pick-and-place pad

is needed for automatic gripping.

Tape width 56 mm

Reel diameter 330 mm

Poles

SL-SMT 3.5/90

SL-SMT 3.5/180

2…11

250 pcs.

200 pcs.

In tape, the open and closed versions of the SL-SMT 3.5 are

currently only available up to 11 poles. Additional tape widths

on request.

Tape width 56 mm

Reel diameter 330 mm

Poles

SL-SMT 3.5/90

SL-SMT 3.5/180

2…9

250 pcs.

200 pcs.

In tape, the flanged version of the SL-SMT 3.5 is currently only

available up to 9 poles. Additional tape widths on request.

even pole numbers

uneven pole numbers

pin header is reversed

even pole numbers

uneven pole numbers

pin header is reversed

Feed direction

Feed direction