Motore di ricerca datesheet componenti elettronici |
|
LCD-7100 Scheda tecnica(PDF) 2 Page - Gamewell-FCI by Honeywell |
|
LCD-7100 Scheda tecnica(HTML) 2 Page - Gamewell-FCI by Honeywell |
2 / 3 page GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0466 Rev. E2 page 2 of 3 www.gamewell-fci.com Description (Continued) Remote Station, Proprietary, and Central Station fire alarm systems. It allows ample space for wiring and room for bat- teries up to 7 A/H capacity. • Features (Continued) • Alarm verification per individual sensor • Positive alarm sequence for sensors or monitor modules • Four levels of system access using six (6), digit pass- words with up to five (5), user passwords per Level • Duplicate and extra address indications • March time (60 or 120 BPM)/temporal pattern/coded fours/California Code/user-defined zone coding • Cross zoning • System configuration programming and 280 event log stored in non-volatile memory • Fan restart with sequential restart delay • Upload/download of panel configuration between panel and FCP-7100 program (password protected feature) • Up to sixty-four (64), 7100 panels in the E3 Broadband network with an optional INI-7100 Module Optional Accessories LCD-7100 The LCD-7100 remote serial display offers an 80-character alphanumeric readout for the remote display of all system events. It duplicates all the information on the 7100 Series panel display and provides key switch protected functions such as System Reset, Alarm Acknowledge, Trouble Acknowledge, Signal Silence, and Drill Test. LEDs on the LCD-7100 indicate Alarm, Supervisory, Sys- tem Trouble, Power Fault, Systems Silenced, NAC#1, and NAC#2 Silenced conditions. The LCD-7100 can be surface or semi-flush mounted on a standard four-gang electrical box. It can be installed up to 4,000 feet (1,219 m) from the main control panel. The 7100 Series fire alarm control panel supports up to five (5), remote LCD-7100 annunciators using one pair of twisted, non-shielded 18 AWG min. wire or serial communication and uses another pair of 16 AWG min. for operating volt- age. (For additional information, refer to the LCD-7100 data sheet, Part Number: 9020-0486). LDM-7100 The LED Driver Module (LDM-7100) is designed to mount in a UL Listed remote annunciator and provides outputs for remote panel switches and thirty-three (33), remote LEDs. Three (3), LDM-7100 modules may be installed in a single annunciator for a total of ninety-nine (99), LEDs per annun- ciator. This combination may be repeated up to five times for a total of fifteen (15), LDM-7100 panels installed at up to five (5), different locations. Maximum distances of up to 4,000 feet (1,219 m) can be achieved using one pair of twisted, non-shielded wire for serial communication and using another pair of straight-lay wire for operating voltage. (For additional information, refer to the LDM-7100 data sheet, Part Number: 9020-0519). •CAOM The Class “A” Optional Module (CAOM) allows Style Y and Z (Class “B” and “A”) operation for both Notification Appli- ance Circuits and allows Style 4 and 6 (Class “B” and “A”) for both Signaling Line Circuits. It also provides disconnect switches for each signaling line circuit and a common dis- connect switch for both notification appliance circuits. •MCOM The Municipal Connection Option Module (MCOM) pro- vides three (3) choices of outputs. It can be configured as a Municipal Circuit (City Box) output. It may also be set to serve as a Reverse Polarity output with a nominal voltage output of 24 VDC at 0.012 amp. maximum alarm and supervisory current. The MCOM’s third option provides a releasing solenoid output rated at: • 24 VDC nominal voltage. • 0.005 amp. supervisory current. • 0.710 amp. maximum alarm current. • 2 ohms maximum line resistance. PTRM The Printer Transient Module (PTRM) provides RS-232 Isolator/Transient protection for the 7100’s RS-232 port (BSM connector J2). It is used in conjunction with a serial printer applied to the RS-232 port for permanent record keeping. •INI-7100 The Intelligent Network Interface Module allows the 7100 Series fire alarm control panel to become the platform of a peer-to-peer, token ring, self-regenerative network com- prised of up to sixty-four (64), 7100 panels. |
Codice articolo simile - LCD-7100 |
|
Descrizione simile - LCD-7100 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |