Motore di ricerca datesheet componenti elettronici |
|
AM26LV31 Scheda tecnica(PDF) 4 Page - Texas Instruments |
|
|
AM26LV31 Scheda tecnica(HTML) 4 Page - Texas Instruments |
4 / 8 page AM26LV31 LOW-VOLTAGE HIGH-SPEED QUADRUPLE DIFFERENTIAL LINE DRIVER SLLS201E – MAY 1995 – REVISED DECEMBER 1999 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended operating supply-voltage and free-air temperature ranges (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP† MAX UNIT VIK Input clamp voltage II = –18 mA –1.5 V VOH High-level output voltage VIH = 2 V, IOH = –12 mA 1.85 2.3 V VOL Low-level output voltage VIL = 0.8 V, IOH = 12 mA 0.8 1.05 V |VOD| Differential output voltage‡ 0.95 1.5 V VOC Common-mode output voltage RL = 100 Ω 1.3 1.55 1.8 V ∆|VOC| Change in magnitude of common-mode output voltage‡ RL = 100 Ω ±0.2 V IO Output current with power off VO = –0.25 V or 6 V, VCC = 0 ±100 µA IOZ Off-state (high-impedance state) output current VO = –0.25 V or 6 V, G = 0.8 V or G = 2 V ±100 µA IIH High-level input current VCC = 0 or 3 V, VI = 5.5 V 10 µA IIL Low-level input current VCC = 3.6 V, VI = 0 –10 µA IOS Short-circuit output current VCC = 3.6 V, VO = 0 –200 mA ICC Supply current (all drivers) VI = VCC or GND, No load 100 µA Cpd Power dissipation capacitance (all drivers)§ No load 160 pF † All typical values are at VCC = 3.3 V and TA = 25°C. ‡ ∆|VOD| and ∆|VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from a high level to a low level. § Cpd determines the no-load dynamic current consumption. IS = Cpd × VCC × f + ICC switching characteristics, VCC = 3.3 V, TA = 25°C PARAMETER TEST CONDITIONS MIN TYP MAX UNIT tPLH Propagation delay time, low- to high-level output 4 8 12 ns tPHL Propagation delay time, high- to low-level output See Figure 2 4 8 12 ns tt Transition time (tr or tf) 3 ns SR Slew rate, single-ended output voltage See Note 3 and Figure 2 0.3 1 V/ns tPZH Output-enable time to high level See Figure 3 10 20 ns tPZL Output-enable time to low level See Figure 4 10 20 ns tPHZ Output-disable time from high level See Figure 3 10 20 ns tPLZ Output-disable time from low level See Figure 4 10 20 ns tsk(p) Pulse skew f = 32 MHz, See Note 4 0.5 1.5 ns tsk(o) Skew limit f = 32 MHz, See Note 5 1.5 ns tsk(lim) Skew limit (device to device) f = 32 MHz, See Note 6 3 ns NOTES: 3. Slew rate is defined by: SR + 90% V OH * VOL * 10% VOH * VOL tr , the differential slew rate of V OD is 2 SR. 4. Pulse skew is defined as the |tPLH – tPHL| of each channel of the same device. 5. Skew limit is the difference between any two outputs of the same device switching in the same direction. 6. Skew limit (device to device) is the maximum difference in propagation delay times between any two channels of any two devices. |
Codice articolo simile - AM26LV31 |
|
Descrizione simile - AM26LV31 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |