Motore di ricerca datesheet componenti elettronici |
|
SM59264 Scheda tecnica(PDF) 10 Page - SyncMOS Technologies,Inc |
|
SM59264 Scheda tecnica(HTML) 10 Page - SyncMOS Technologies,Inc |
10 / 36 page SyncMOS Technologies International, Inc. SM59264 8-Bits Micro-controller with 128KB flash & 1KB RAM & TWSI & SPWM embedded Specifications subject to change without notice contact your sales representatives for the most recent information. Ver 2.1 SM59264 08/2006 10 Read data flash: Using direct external addressing mode (by instruction MOVX). Reading on-chip data flash will be the same as reading external RAM with MOVX instruction. For example, MOVX A, @DPTR or MOVX A, @Ri ; i=0,1 instruction with 16-bit addressing space. Write data flash: Using ISP ‘byte program’ function will have to set the FAU0 bit at first. Erase data flash: Including ISP ‘chip erase’ function and ‘page erase’ function. When using ‘chip erase’ function, it will erase all the 64K byte data flash plus 64K byte program ROM flash except the ISP service program space if lock bit ‘N’ been configured. Chip protect flash: Using ISP ‘chip protect’ function will protect the 64K byte data flash plus 64K byte program ROM flash from read out. Once flash been protected, the content read will be all ‘00’. For ‘byte program’ and ‘page erase’ flash-address-dependent ISP functions, user need to specify the FAU0 bit (=FA16) of ISPC ($F7) at first for doing with data flash space. The 64K data flash also can be programmed or erased on writer. 1.3.1 Second Data Pointer Register - RCON ($85) and MOVX @Ri, i=1,2 with read function Using RCON register with MOVX @Ri, i=0,1 instruction enables SM59264 has second Data Pointer Register (DPTR) with read function only. The content of RCON register determines high byte address of 64KB data flash while content of MOVX@Ri instruction determines low byte address. This feature similar to DPH and DPL register of MOVX @ DPTR instruction but with read function only. Using MOVX @Ri instruction to write data to the data flash will have no effect. System Control Register (SCONF, $BF) bit-7 bit-0 WDR Unused Unused Unused DFEN ISPE OME ALEI Read / Write: R/W - - - R/W R/W R/W R/W Reset value: 0 * * * 0 0 0 0 WDR: Watch Dog Timer Reset. When system reset by Watch Dog Timer overflow, WDR will be set to 1, The bit 7 (WDR) of SCONF is Watch Dog Timer Reset bit. It will be set to 1 when reset signal generated by WDT overflow. User should check WDR bit whenever un-predicted reset happened. DFEN: 64K Data Flash enable bit. The default setting of DFEN bit is 0 (disable). ISPE: ISP enable bit OME: 768 bytes on-chip RAM enable bit, The bit 1 (OME) of SCONF can enable or disable the on-chip expanded 768 byte RAM. The default setting of OME bit is 0 (disable). ALEI: ALE output inhibit bit, to reduce EMI, Setting bit 0 (ALEI) of SCONF can inhibit the clock signal in Fosc/6Hz output to the ALE pin. |
Codice articolo simile - SM59264_06 |
|
Descrizione simile - SM59264_06 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |