Motore di ricerca datesheet componenti elettronici |
|
OP265B Scheda tecnica(PDF) 3 Page - OPTEK Technologies |
|
OP265B Scheda tecnica(HTML) 3 Page - OPTEK Technologies |
3 / 4 page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 07/06 Page 3 of 4 Plastic Infrared Emitting Diode OP265, OP266 Series (A, B, C, D, W) Notes: 1. RMA flux is recommended. Duration can be extended to 10 second maximum when flow soldering. A maximum of 20 grams force may be applied to the leads when soldering. 2. Derate linearly at 1.33 mW/° C above 25° C. 3. EE(APT) is a measurement of the average apertured radiant incidence upon a sensing area 0.081” (2.06 mm) in diameter, perpendicular to and centered on the mechanical axis of the lens and 0.590” (14.99 mm) from the measurement surface. EE(APT) is not necessarily uniform within the measured area. Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage and Operating Temperature Range -40o C to +100o C Reverse Voltage 2.0 V Continuous Forward Current 50 mA Peak Forward Current (1 µs pulse width, 300 pps) 3.0 A Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C(1) Power Dissipation 100 mW(2) Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode EE (APT) Apertured Radiant Incidence OP265A, OP266A OP265B, OP266B OP265C, OP266C OP265D, OP266D 2.70 1.65 0.54 0.54 - - - - - 4.70 3.30 - mW/cm2 IF = 20 mA (3) PO Radiant Power Output OP265, OP266 (A, B, C, D) OP265W, OP266W - 1.00 - - - - mW IF = 20 mA VF Forward Voltage - - 1.80 V IF = 20 mA IR Reverse Current - - 100 µA VR= 2 V λP Wavelength at Peak Emission - 890 - nm IF = 10 mA B Spectral Bandwidth between Half Power Points - 80 - nm IF = 10 mA ∆λP /∆T Spectral Shift with Temperature OP265, OP266 (A, B, C, D) OP265W, OP266W - - ±0.30 ±0.18 - - nm/°C IF = Constant θHP Emission Angle at Half Power Points OP265, OP266 (A, B, C, D) OP265W, OP266W - - 18 90 - - Degree IF = 20 mA tr Output Rise Time - 500 - ns tf Output Fall Time - 250 - ns IF(PK)=100 mA, PW=10 µs, D.C.=10.0% |
Codice articolo simile - OP265B |
|
Descrizione simile - OP265B |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |