Motore di ricerca datesheet componenti elettronici
  Italian  ▼

Delete All
ON OFF
ALLDATASHEETIT.COM

X  

Preview PDF Download HTML

BD3852MUZ-Z Scheda tecnica(PDF) 10 Page - Rohm

Il numero della parte BD3852MUZ-Z
Spiegazioni elettronici  Shock Sensor (Impact Sensor) IC
Download  17 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Produttore elettronici  ROHM [Rohm]
Homepage  http://www.rohm.com
Logo ROHM - Rohm

BD3852MUZ-Z Scheda tecnica(HTML) 10 Page - Rohm

Back Button BD3852MUZ-Z Datasheet HTML 6Page - Rohm BD3852MUZ-Z Datasheet HTML 7Page - Rohm BD3852MUZ-Z Datasheet HTML 8Page - Rohm BD3852MUZ-Z Datasheet HTML 9Page - Rohm BD3852MUZ-Z Datasheet HTML 10Page - Rohm BD3852MUZ-Z Datasheet HTML 11Page - Rohm BD3852MUZ-Z Datasheet HTML 12Page - Rohm BD3852MUZ-Z Datasheet HTML 13Page - Rohm BD3852MUZ-Z Datasheet HTML 14Page - Rohm Next Button
Zoom Inzoom in Zoom Outzoom out
 10 / 17 page
background image
10/14
TSZ02201-0E3E0FZ00890-1-2
© 2020 ROHM Co., Ltd. All rights reserved.
11.Mar.2020 Rev.001
www.rohm.com
TSZ22111 • 15 • 001
BD3852MUZ-Z
Operational Notes
1.
Reverse Connection of Power Supply
Connecting the power supply in reverse polarity can damage the IC. Take precautions against reverse polarity when
connecting the power supply, such as mounting an external diode between the power supply and the IC’s power supply
pins.
2.
Power Supply Lines
Design the PCB layout pattern to provide low impedance supply lines. Furthermore, connect a capacitor to ground at
all power supply pins. Consider the effect of temperature and aging on the capacitance value when using electrolytic
capacitors.
3.
Ground Voltage
Ensure that no pins are at a voltage below that of the ground pin at any time, even during transient condition.
4.
Ground Wiring Pattern
When using both small-signal and large-current ground traces, the two ground traces should be routed separately but
connected to a single ground at the reference point of the application board to avoid fluctuations in the small-signal
ground caused by large currents. Also ensure that the ground traces of external components do not cause variations
on the ground voltage. The ground lines must be as short and thick as possible to reduce line impedance.
5.
Recommended Operating Conditions
The function and operation of the IC are guaranteed within the range specified by the recommended operating
conditions. The characteristic values are guaranteed only under the conditions of each item specified by the electrical
characteristics.
6.
Inrush Current
When power is first supplied to the IC, it is possible that the internal logic may be unstable and inrush current may flow
instantaneously due to the internal powering sequence and delays, especially if the IC has more than one power supply.
Therefore, give special consideration to power coupling capacitance, power wiring, width of ground wiring, and routing
of connections.
7.
Testing on Application Boards
When testing the IC on an application board, connecting a capacitor directly to a low-impedance output pin may subject
the IC to stress. Always discharge capacitors completely after each process or step. The IC’s power supply should
always be turned off completely before connecting or removing it from the test setup during the inspection process. To
prevent damage from static discharge, ground the IC during assembly and use similar precautions during transport and
storage.


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17 


Scheda tecnica Scarica

Go To PDF Page


Link URL




Privacy Policy
ALLDATASHEETIT.COM
Lei ha avuto il aiuto da alldatasheet?  [ DONATE ] 

Di alldatasheet   |   Richest di pubblicita   |   contatti   |   Privacy Policy   |   scambio Link   |   Ricerca produttore
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn