UZK12.071, UZO12.07

U-Series

-10°C to +40°C (14°F to 104°F)

For charging

Frequently charging below +5°C (41°F) reduced

the lifetime of the battery

-15°C to +50°C (5°F to 122°F)

For discharging

Storage temperature

-20°C to +50°C (-4°F to 122°F)

For storage and transportation

Recommendation:

Do not store at temperatures higher than 25°C

or performance and lifetime may change.

Humidity

5 to 95% r.h.

IEC 60068-2-30

Do not energize while condensation is present

Vibration sinusoidal

±4mm at 16.7Hz

fixed frequency for 1hour

Vibration in vertical mounting orientation

according to IEC/EN 61056-1

Shock

free fall from 20cm

onto a wooden floor

Shock with bottom down orientation

according to IEC/EN 61056-1

Altitude

0 to 6000m (0 to 20 000ft)

Degree of pollution

2

According to IEC 62477-1, not conductive

LABS compatibility

The unit does not release any silicone or other LABS-critical substances and is suitable for

use in paint shops.

Corrosive gases

ISA-71.04-1985, Severity Level G3

*)

Operational temperature is the same as the ambient temperature and is defined as the air temperature 2cm below the unit.

The terminals are IP20 Finger safe constructed and suitable for field- and factory wiring.

Power terminals

Type

Screw terminals

Maximal wire size, solid wire

Maximal wire size, stranded wire

American Wire Gauge

AWG 12-10

Maximal wire diameter

3.5mm (including ferrules)

Wire stripping length

7mm / 0.28inch

Screwdriver

Slotted 3.5x0.5mm

Recommended tightening torque

0.5Nm, 4.5lb.in

Instructions:

a)

Follow national installation codes and installation regulations!

b)

Ensure that all strands of a stranded wire enter the terminal connection!

c)

Unused terminal compartments should be securely tightened.

d)

Ferrules are allowed.

Aug. 2017 / Rev. 2.2 DS-UZK12.071

All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

6/11