UZK12.071, UZO12.07

U-Series

Panel/ wall mounting is possible by detaching the DIN-Rail brackets

Fig. 17-1 Panel/ wall mounting – Removing the aluminium brackets and plastic slide

Detach the two aluminum brackets

by removing the two screws with a

Torx screwdriver (Torx 10).

Remove the plastic lock mechanism

by using a flat-blade screwdriver to

move the lock downwards while

pushing the plastic slide upwards at

the same time. Detach the plastic

slide.

Panel/ wall mounting is possible

by using either the four holes on

the rear or on the bottom of the

unit.

Fig. 17-2 Hole pattern for wall mount

Fig. 17-3 Hole pattern for bottom mount

All dimensions in mm

All dimensions in mm

Aug. 2017 / Rev. 2.2 DS-UZK12.071

All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

9/11