Motore di ricerca datesheet componenti elettronici |
|
RX111 Scheda tecnica(PDF) 64 Page - Renesas Technology Corp |
|
RX111 Scheda tecnica(HTML) 64 Page - Renesas Technology Corp |
64 / 127 page R01DS0190EJ0130 Rev.1.30 Page 64 of 127 May 31, 2016 RX111 Group 5. Electrical Characteristics Note 1. The reference power supply current is included in the power supply current value for D/A conversion. Note 2. Current consumed only by the USB module. Note 3. Includes the current supplied from the pull-up resistor of the USB0_DP pin to the pull-down resistor of the host device, in addition to the current consumed by this MCU during the suspended state. Note 4. When VCC = VCC_USB = 3.3 V. Note 5. The value of the current flowing to VCC. Note 6. Current consumed by the power supply (VCC). Note 7. When VCC = AVCC0 = VCC_USB = 3.3 V. Table 5.12 DC Characteristics (10) Conditions: 1.8 V ≤ VCC = VCC_USB ≤ 3.6 V, 1.8 V ≤ AVSS0 ≤ 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, Ta = –40 to +105°C Item Symbol Min. Typ.*7 Max. Unit Test Conditions Analog power supply current During A/D conversion (at high-speed conversion) IAVCC —0.7 1.2 mA Waiting for A/D (all units) —— 0.3 μA During D/A conversion (per channel)*5 —— 1.5 mA Reference power supply current During A/D conversion (at high-speed conversion) IREFH0 —25 52 μA Waiting for A/D conversion (all units) — — 60 nA Temperature sensor*6 ITEMP —75 — μA LDV1, 2 Per channel ILVD —0.15 — μA USB operating current During USB communication operation under the following settings and conditions Host controller operation is set to full-speed mode Bulk OUT transfer (64 bytes) × 1, bulk IN transfer (64 bytes) × 1 Connect peripheral devices via a 1-meter USB cable from the USB port. IUSBH*2 —4.3 (VCC) 0.9 (VCC_USB) *4 —mA During USB communication operation under the following settings and conditions Function controller operation is set to full-speed mode Bulk OUT transfer (64 bytes) × 1, bulk IN transfer (64 bytes) × 1 Connect the host device via a 1-meter USB cable from the USB port. IUSBF*2 —3.6 (VCC) 1.1 (VCC_USB) *4 —mA During suspended state under the following setting and conditions Function controller operation is set to full-speed mode (pull up the USB0_DP pin) Software standby mode Connect the host device via a 1-meter USB cable from the USB port. ISUSP*3 —0.35 (VCC) 170 (VCC_USB) *4 — μA Table 5.13 DC Characteristics (11) Conditions: 1.8 V ≤ VCC = VCC_USB ≤ 3.6 V, 1.8 V ≤ AVSS0 ≤ 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, Ta = –40 to +105°C Item Symbol Min. Typ. Max. Unit Test Conditions RAM standby voltage VRAM 1.8 — — V |
Codice articolo simile - RX111_16 |
|
Descrizione simile - RX111_16 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |