ABSOLUTE MAXIMUM RATINGS

(1) (2)

THERMAL IMPEDANCE

RECOMMENDED OPERATING CONDITIONS

TS5A21366

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

–0.5

6.5

V

–0.5

V

Analog port diode current

–50

mA

ON-state switch current

–200

200

mA

–400

400

–0.5

6.5

V

Digital input clamp current

–50

mA

100

mA

Continuous current through GND

–100

100

mA

Storage temperature range

–65

150

°C

(1)

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum

(3)

All voltages are with respect to ground, unless otherwise specified.

(4)

The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

(5)

This value is limited to 5.5 V maximum.

(6)

Pulse at 1-ms duration <10% duty cycle

UNIT

DCU package

227

θ

JA

°C/W

RSE package

253

(1)

The package thermal impedance is calculated in accordance with JESD 51-7.

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

1.65

5.5

V

Analog signal voltage range

0

V

Control input voltage range

0

5.5

V

Ambient temperature

–40

85

°C

(1)

Copyright © 2009, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Link(s): TS5A21366