The copyright and authority for the interpretation of the products are reserved by MORNSUN

TCxxxPW

2013.06.07-A/1

Page 4 of 4

INSTALLATION & DISASSEMBLY

Installation

DIN35mm standard rail installation:

1.Insert the top of the instrument card in the rail;

2.Push the bottom of the instrument into the rail.

1

2

Disassembly

1. Insert a screwdriver between the bottom of the card lock and the rail;

2. Pull up the screwdriver and press the card lock downwards;

3. Pull the instrument out of the rail.

1

2

3

PACKAGING DIMENSION & PACKAGING DIAGRAM

Note:

1. All specifications are measured at Ta=25

°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.

2. In this datasheet, all the test setup and methods are based on our corporate standards.

3. All characteristics are for listed models, and non-standard models may perform differently. Please contact our technical support for more detail.

4. Contact us for your specific requirement.

5. Specifications are subject to change without prior notice.

MORNSUN Science & Technology Co.,Ltd.

Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.

Tel: 86-20-38601850

Fax:86-20-38601272

E-mail: info@mornsun.cn

Http://www.mornsun-power.com