MC74VHCT573A

VHC Data – Advanced CMOS Logic

DL203 — Rev 1

7

MOTOROLA

OUTLINE DIMENSIONS

M SUFFIX

PLASTIC SOIC EIAJ PACKAGE

CASE 967–01

ISSUE O

DIM

MIN

MAX

MIN

MAX

INCHES

–––

2.05

–––

0.081

MILLIMETERS

0.05

0.20

0.002

0.008

0.35

0.50

0.014

0.020

0.18

0.27

0.007

0.011

12.35

12.80

0.486

0.504

5.10

5.45

0.201

0.215

1.27 BSC

0.050 BSC

7.40

8.20

0.291

0.323

0.50

0.85

0.020

0.033

1.10

1.50

0.043

0.059

0

0.70

0.90

0.028

0.035

–––

0.81

–––

0.032

A1

HE

Q1

LE

0

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETER.

3. DIMENSIONS D AND E DO NOT INCLUDE MOLD

FLASH OR PROTRUSIONS AND ARE MEASURED

AT THE PARTING LINE. MOLD FLASH OR

PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006)

PER SIDE.

4. TERMINAL NUMBERS ARE SHOWN FOR

REFERENCE ONLY.

5. THE LEAD WIDTH DIMENSION (b) DOES NOT

INCLUDE DAMBAR PROTRUSION. ALLOWABLE

DAMBAR PROTRUSION SHALL BE 0.08 (0.003)

TOTAL IN EXCESS OF THE LEAD WIDTH

DIMENSION AT MAXIMUM MATERIAL CONDITION.

DAMBAR CANNOT BE LOCATED ON THE LOWER

RADIUS OR THE FOOT. MINIMUM SPACE

BETWEEN PROTRUSIONS AND ADJACENT LEAD

TO BE 0.46 ( 0.018).

HE

A1

LE

Q1

_

c

A

Z

D

E

20

110

11

b

M

0.13 (0.005)

e

0.10 (0.004)

VIEW P

DETAIL P

M

L

A

b

c

D

E

e

L

M

Z

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and

specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola

data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”

must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of

others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other

applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury

or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees

arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that

Motorola was negligent regarding the design or manufacture of the part. Motorola and

are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal

Opportunity/Affirmative Action Employer.

MC74VHCT573A/D

◊

Mfax is a trademark of Motorola, Inc.

How to reach us:

USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;

JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1,

P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447

Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488

Mfax

™: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609

ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,

– US & Canada ONLY 1–800–774–1848

51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

INTERNET: http://motorola.com/sps