Multilayer Ceramic Capacitors

Approval Sheet

Page 10 of 11

ASC_Microwave_AECQ200_(RT)

May. 2019

◙ Example of customer label

*Customized label is available upon request.

◙ Constructions

◙ Storage and handling conditions

(1) To store products at 5 to 40

°C ambient temperature and 20 to 70%. related humidity conditions.

(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life

extension is needed.

Cautions:

a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.

Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide,

chlorine, ammonia gas etc.)

b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low

reliability.

c.

Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by

direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under

direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.

a. Customer name

b. WTC order series and item number

c. Customer P/O

d. Customer P/N

e. Description of product

f. Quantity

g. Bar code including quantity & WTC P/N or customer

h. WTC P/N

i. Shipping date

j. Order bar code including series and item numbers

k. Serial number of label

No.

Name

NP0

1

Ceramic material

Hi-Q dielectric ceramic

2

Inner electrode

Cu

3

Termination

Inner layer

Cu + Conductive Resin

4

Middle layer

Ni

5

Outer layer

Sn (Matt)

Fig. 5 The construction of MLCC