![]() |
Motore di ricerca datesheet componenti elettronici |
|
WAS4723Q Datasheet(Scheda tecnica) 3 Page - Will Semiconductor Ltd. |
|
3 page ![]() WAS4723Q Will Semiconductor Ltd. 3 Absolute Maximum Ratings (1) Parameter Symbol Value Unit Supply Voltage VCC -0.3 ~ 6.5 V Control Input Voltage VINX -0.3 ~ 6.5 V DC Input Voltage (2) VINPUT -0.3 ~ 6.5 V Continuous Current NO_NC_COM_ ± 300 mA Peak Current NO_NC_COM_ (pulsed at 1ms 50% duty cycle) ± 400 mA Peak Current NO_NC_COM_ (pulsed at 1ms 10% duty cycle) ± 500 mA Storage Temperature Range TSTG -65 ~ 150 oC Junction Temperature under Bias TJ 150 oC Lead Temperature (Soldering, 10 seconds) TL 260 oC Power Dissipation PD 250 mW Recommend operating ratings (3) Parameter Symbol Value Unit Supply Voltage Operating VCC 2.3 ~ 5.5 V Control Input Voltage VIN 0.0 ~ VCC V Input Signal Voltage VIS 0.0 ~ VCC V Operating Temperature TA -40 ~ 85 oC Input Raise and Fall Time(Control Input VCC=2.3~3.6V) tr,tf 0 ~ 10 ns/V Thermal Resistance RθJA 350 oC/W Note: 1. “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. 2. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. 3. Control input must be held high or Low, it must not float. Mar, 2017 - Rev. 1.5 |
|