Motore di ricerca datesheet componenti elettronici |
|
K9F1G08U0E Scheda tecnica(PDF) 15 Page - Samsung semiconductor |
|
K9F1G08U0E Scheda tecnica(HTML) 15 Page - Samsung semiconductor |
15 / 38 page - 15 - datasheet K9F1G08U0E FLASH MEMORY Rev. 1.11 SAMSUNG CONFIDENTIAL 3.0 NAND FLASH TECHNICAL NOTES 3.1 Initial Invalid Block(s) Initial invalid blocks are defined as blocks that contain one or more initial invalid bits whose reliability is not guaranteed by Samsung. The information regarding the initial invalid block(s) is called the initial invalid block information. Devices with initial invalid block(s) have the same quality level as devices with all valid blocks and have the same AC and DC characteristics. An initial invalid block(s) does not affect the performance of valid block(s) because it is isolated from the bit line and the common source line by a select transistor. The system design must be able to mask out the initial invalid block(s) via address mapping. The 1st block, which is placed on 00h block address, is guaranteed to be a valid block up to 1K program/erase cycles with 1bit/528Byte ECC. 3.2 Identifying Initial Invalid Block(s) All device locations are erased(FFh) except locations where the initial invalid block(s) information is written prior to shipping. The initial invalid block(s) status is defined by the 1st byte in the spare area. Samsung makes sure that either the 1st or 2nd page of every initial invalid block has non-FFh data at the column address of 2048. Since the initial invalid block information is also erasable in most cases, it is impossible to recover the information once it has been erased. Therefore, the system must be able to recognize the initial invalid block(s) based on the original initial invalid block information and create the initial invalid block table via the following suggested flow chart(Figure 3). Any intentional erasure of the original initial invalid block information is pro- hibited. [Figure 3] Flow chart to create initial invalid block table * Check "FFh" at the column address 2048 Start Set Block Address = 0 Check "FFh" Increment Block Address Last Block ? End No Yes Yes Create (or update) No Initial of the 1st and 2nd page in the block Invalid Block(s) Table |
Codice articolo simile - K9F1G08U0E |
|
Descrizione simile - K9F1G08U0E |
|
|
Link URL |
Privacy Policy |
ALLDATASHEETIT.COM |
Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |